Stainless Steel Pressurized Solar Water Heater
Solar collector evacuated tubes collect and convert sunshine energy into thermal en-ergy, which is transferred to the central heat pipes in the tubes through the aluminum fins bridging the tube inner surfaces and the heat pipes. The copper heat pipes have tiny amount of purified water sealed in them at depressurized condition. When heated, the water inside the heat pipes vaporizes at low temperature (about 30 ). The vapor (steam) rises to the pipe tips inserted into the water contained in the tank. Vapor is cooled down and becomes condensate falling to the bottom of the pipes. By continuously circulating this way, heat is carried from outside to the water inside the tank.
Even in the winter or the cloudy days, you can still use this products. We can use the heat element as a auxiliary energy to heat the water. The main source is still the solar energy. We can use the computer controller(model SM-SS-P) to control the heatelement to work automaticly.
If you have any especial requirement,please tell us ,we will make it according to your requirement.
1.Outer shell of water tank :SUS3042B/BA with 0.4 mm thickness
2.Outer diameter of water tank:470mm
3.Inner tank :SUS3042B with 1.2mm thickness
4.Inner diameter of water tank :360mm
5.Insulating layer:55mm Polyurethane
6.Frame:1.2mm 202/304 with 25°-45°
7.Reflector:0.21mm Flat aluminium/Stainless steel(To order)
8.Vacuum tube :58-1800 vacuum tube with three target coatin